LifeSpan® Stainless Steel Gate Latch
with Black Powder Coat Finish
Black finish on stainless steel automatic type gate latch. Includes stainless steel strike, and 6- #10 x 1-1/4" stainless steel Phillips pan head tapping screws with a matching finish.
Base Dimensions are 1-7/16" wide x 1-5/8" high. Overall height is 2-1/4" and projection is 2-3/16". Strike is 3/8" in diameter and 4-1/8" overall length.
LifeSpan®Satin Stainless Steel
Adjust-O-Matic Gate Latch
The self adjusting strike is designed to accomodate single action gates with 1/2" of sag. Can be used for right or left-hand installations.
The latch is made of type 300 series stainless steel, and includes type 18-8 stainless steel fasteners.
A padalock (not included) can be inserted into the hole in the latch for extra security.
Stainless Steel Gate Latch Cable
This cable is designed to open the gate latch from the opposite side of the fence.
*** Best Quality & Best Value ***
Stainless Steel Gate Latches
Features
- The slight oversize adds proportion and visual character to the classic design
- All parts are made from type 304 stainless steel
- Parts are de-burred with the edges eased and have a uniform quality look and feel
- Includes a 7/16" diameter strike bar (approximately 5" overall length) in matching finish
- A rounded end on the strike bar adds an element of detail
- Includes type 18-8 stainless steel screws in matching color
- Options- Available with 1" or 2" longer strike bar (see listings below)
Available in 5 Finishes
- Mill Finish Stainless Steel- Other than de-burring, the parts are unfinished.
- Matt Stainless Steel- A uniform dull coarse finish as produced by sandblasting.
- Brushed Stainless Steel- A polished finish that has been lightly brushed.
- Satin Bronze PVD- A satin smooth, low luster, rich, light to medium white bronze color that will darken with touch, time, and environmental elements. This finish blends especially well with natural woods.
- Satin Black PVD- A satin smooth, low luster, rich black finish.
Physical Vapor Deposition (PVD) is one of the most durable decorative finishes on the market today.
1" Longer Strike Bar Option
These sets are the same as the 1014 series listed above except the strike bar is 1" longer.
2" Longer Strike Bar Option
These sets are the same as the 1014 series listed above except the strike bar is 2" longer.
Stainless Steel Swinging Door Latch
Designed for single action in-swinging and out-swining gates and doors from 3/4" to 2-1/4" thickness, and can be installed to accommodate right or left-hand installations.
The latch is made of heavy gauge type 300 series stainless steel, includes type 18-8 stainless steel fasteners, and a stainless steel catch for holding the gate in the open position.
A padalock (not included) can be utilized to secure the handle in the latched position.
WeathergardTM Mechanically Galvanized
Automatic Type Gate Latch
This latch is designed for use on flush mounted out-swinging or in-swinging gates and doors. The fingertip trip release can also be operated with a pull cord or wire on the opposite side. The latch body has a hole for a padlock (accepts shackle diameter up to 11/32") so the unit can be locked for added security.
The set includes a galvanized body and flipper connected with an aluminum or stainless steel rivet, a galvanized strike, and 6- #10 x 1-1/4" galvanized steel Phillips pan head tapping screws.
Base Dimensions are 1-21/32" wide x 1-3/8" high. Overall height is 2-1/4" and projection is 2-3/16". Strike is 3/8" in diameter and 4-1/8" overall length.
WeathergardTM Mechanically Galvanized
Automatic Type Self-Adjusting Gate Latch
This latch is designed for use on flush mounted out-swinging or in-swinging gates and doors, where a self-adjusting action is desired to compensate for gate sag. The fingertip trip release can also be operated with a pull cord or wire on the opposite side. The latch body has a hole for a padlock (accepts shackle diameter up to 11/32") so the unit can be locked for added security.
The set includes a galvanized body and flipper connected with an aluminum rivet, a galvanized self-adjusting strike assembly, and 6- #10 x 1-1/4" galvanized steel Phillips pan head tapping screws.
Base Dimensions are 1-21/32" wide x 1-3/8" high. Overall height is 2-1/4" and projection is 2-3/16". Strike is 3/8" in diameter and 4-1/8" overall length.
Stainless Steel Automatic Type Gate Latch Set
Satin finish type 304 stainless steel body, with a mill finish stainless steel strike. Includes 4- #12 x 3/4" and 2- #14 x 1-1/2" Phillips pan head type 18-8 stainless steel tapping screws.
Strike is 3/8" in diameter and 4-7/8" overall length.
Made in USA (fasteners made in Asia)
Stainless Steel Automatic Type Gate Latch Replacement Strike
Type 304 stainless steel replacement strike, with 2- #14 x 1-1/2" Phillips pan head type 18-8 stainless steel tapping screws.
Strike is 3/8" in diameter and 4-7/8" overall length.
Made in USA (fasteners made in Asia)
Plastic Knuckle Catch
This strong white polyacetal catch and white polyamide strike, has a push-in force rating of 12.5 lbs., and a pull-out force rating of 15.6 lbs..
Note: Screws are not included.