Gate Latches

LifeSpan® Stainless Steel Gate Latch

Satin (brushed) stainless steel automatic type gate latch. Includes stainless steel strike, 6- #10 x 1-1/4" stainless steel Phillips pan head tapping screws.


Base Dimensions are 1-7/16" wide x 1-5/8" high. Overall height is 2-1/4" and projection is 2-3/16". Strike is 3/8" in diameter and 4-1/8" overall length.

#101330-

LifeSpan© Satin Stainless Steel Automatic Type Gate Latch

$8.95

Quantity


LifeSpan® Stainless Steel Gate Latch
with Black Powder Coat Finish

Black finish on stainless steel automatic type gate latch. Includes stainless steel strike, and 6- #10 x 1-1/4" stainless steel Phillips pan head tapping screws with a matching finish.


Base Dimensions are 1-7/16" wide x 1-5/8" high. Overall height is 2-1/4" and projection is 2-3/16". Strike is 3/8" in diameter and 4-1/8" overall length.

#101396-

LifeSpan© Satin Stainless Steel Automatic Type Gate Latch w/Black Finish

$10.75

Quantity


LifeSpan®Satin Stainless Steel
Adjust-O-Matic Gate Latch

The self adjusting strike is designed to accomodate single action gates with 1/2" of sag. Can be used for right or left-hand installations.


The latch is made of type 300 series stainless steel, and includes type 18-8 stainless steel fasteners.


A padalock (not included) can be inserted into the hole in the latch for extra security.

#101230-

Satin Stainless Steel Automatic Self-Adjusting Gate Latch

$13.44

Quantity




Stainless Steel Automatic Gate Latch Size Comparison



*** Best Quality & Best Value ***

Stainless Steel Gate Latches

Features

  • The slight oversize adds proportion and visual character to the classic design
  • All parts are made from type 304 stainless steel
  • Parts are de-burred with the edges eased and have a uniform quality look and feel
  • Includes a 7/16" diameter strike bar in matching finish
  • A rounded end on the strike bar adds an element of detail
  • Includes type 18-8 stainless steel screws in matching color
  • Options- Available with 1" or 2" longer strike bar (see listings below)

Available in 5 Finishes

  • Mill Finish Stainless Steel- Other than de-burring, the parts are unfinished.
  • Matt Stainless Steel- A uniform dull coarse finish as produced by sandblasting.
  • Brushed Stainless Steel- A polished finish that has been lightly brushed.
  • Satin Bronze PVD- A satin smooth, low luster, rich, light to medium white bronze color that will darken with touch, time, and environmental elements. This finish blends especially well with natural woods.
  • Satin Black PVD- A satin smooth, low luster, rich black finish.

Physical Vapor Deposition (PVD) is one of the most durable decorative finishes on the market today.

#101400-

Large Mill Finish Stainless Steel Gate Latch

$11.33

Quantity

#101401-

Large Matt Finish Stainless Steel Gate Latch

$10.50

Quantity

#101429-

Large Polished Stainless Steel Gate Latch

$12.28

Quantity

#101430-

Large Brushed Finish Stainless Steel Gate Latch

$12.70

Quantity

#101497-

Large Satin Bronze PVD Finish Stainless Steel Gate Latch

$14.49

Quantity

#101496-

Large Satin Black PVD Finish Stainless Steel Gate Latch

$14.98

Quantity


1" Longer Strike Bar Option

These sets are the same as the 1014 series listed above except the strike bar is 1" longer.


#101500-

Large Mill Finish Stainless Steel Gate Latch +1

$12.96

Quantity

#101529-

Large Polished Stainless Steel Gate Latch +1

$14.33

Quantity

#101530-

Large Brushed Finish Stainless Steel Gate Latch +1

$14.65

Quantity


2" Longer Strike Bar Option

These sets are the same as the 1014 series listed above except the strike bar is 2" longer.


#101600-

Large Mill Finish Stainless Steel Gate Latch +2

$13.38

Quantity

#101629-

Large Polished Stainless Steel Gate Latch +2

$14.75

Quantity

#101630-

Large Brushed Finish Stainless Steel Gate Latch +2

$15.25

Quantity


Stainless Steel Swinging Door Latch

Designed for single action in-swinging and out-swining gates and doors from 3/4" to 2-1/4" thickness, and can be installed to accommodate right or left-hand installations.


The latch is made of heavy gauge type 300 series stainless steel, includes type 18-8 stainless steel fasteners, and a stainless steel catch for holding the gate in the open position.


A padalock (not included) can be utilized to secure the handle in the latched position.

#105930-

Stainless Steel Swinging Door Latch

$34.50

Quantity


WeathergardTM Mechanically Galvanized
Automatic Type Gate Latch

This latch is designed for use on flush mounted out-swinging or in-swinging gates and doors. The fingertip trip release can also be operated with a pull cord or wire on the opposite side. The latch body has a hole for a padlock (accepts shackle diameter up to 11/32") so the unit can be locked for added security.


The set includes a galvanized body and flipper connected with an aluminum rivet, a galvanized strike, and 6- #10 x 1-1/4" galvanized steel Phillips pan head tapping screws.


Base Dimensions are 1-21/32" wide x 1-3/8" high. Overall height is 2-1/4" and projection is 2-3/16". Strike is 3/8" in diameter and 4-1/8" overall length.

#101339-

WeathergardTM Mechanically Galvanized Automatic Type Gate Latch

$3.95

*** Special Price / Limited Quantity ***


Quantity


WeathergardTM Mechanically Galvanized
Automatic Type Self-Adjusting Gate Latch

This latch is designed for use on flush mounted out-swinging or in-swinging gates and doors, where a self-adjusting action is desired to compensate for gate sag. The fingertip trip release can also be operated with a pull cord or wire on the opposite side. The latch body has a hole for a padlock (accepts shackle diameter up to 11/32") so the unit can be locked for added security.


The set includes a galvanized body and flipper connected with an aluminum rivet, a galvanized self-adjusting strike assembly, and 6- #10 x 1-1/4" galvanized steel Phillips pan head tapping screws.


Base Dimensions are 1-21/32" wide x 1-3/8" high. Overall height is 2-1/4" and projection is 2-3/16". Strike is 3/8" in diameter and 4-1/8" overall length.

#101239-

WeathergardTM Mechanically Galvanized Automatic Type Self Adjusting Gate Latch

$7.67

Quantity


Stainless Steel Automatic Type Gate Latch Set

Satin finish type 304 stainless steel body, with a mill finish stainless steel strike. Includes 4-  #12 x 3/4" and 2-  #14 x 1-1/2" Phillips pan head type 18-8 stainless steel tapping screws.


Strike is 3/8" in diameter and 4-7/8" overall length.


Made in USA (fasteners made in Asia)

#101170-

Satin SS Gate Latch Body with Mill Finish SS Strike

$21.95

*** Limited to Quantity on Hand ***


Quantity


Stainless Steel Automatic Type Gate Latch Replacement Strike

Type 304 stainless steel replacement strike, with 2-  #14 x 1-1/2" Phillips pan head type 18-8 stainless steel tapping screws.


Strike is 3/8" in diameter and 4-7/8" overall length.


Made in USA (fasteners made in Asia)

#101104-

3/8" Diameter SS Gate Latch Replacement Strike

$7.95

*** Limited to Quantity on Hand ***


Quantity