Details/Specifications


4" Heavy Duty Mechanically Galvanized T Hinge

4"  Heavy Duty Mechanically Galvanized T Hinge


5" Heavy Duty Mechanically Galvanized T Hinge

5"  Heavy Duty Mechanically Galvanized T Hinge


6" Heavy Duty Mechanically Galvanized T Hinge

6"  Heavy Duty Mechanically Galvanized T Hinge


8" Heavy Duty Mechanically Galvanized T Hinge

8"  Heavy Duty Mechanically Galvanized T Hinge



Heavy Duty Mechanically Galvanized
T-Hinges with Staked Weatherguard Zinc Finish Steel Pins


These hinges have bushings that space the knuckles and Weatherguard zinc finish steel pins, so as to eliminate metal to metal contact, reducing wear and increasing life expectancy by up to 500%.


The bushings provide for a smooth, quiet operation and remain dimensionally and structurally sound in hot and cold climates.


The mechanically galvanized finish on the leaves offers corrosion resistance when applied to steel and is recommended for areas where corrosive elements, such as salt air, are present.


Item No. Size Leaf Thickness Overall Width Quantity and Size of Screws Safe Work Load
134337 4" 0.08" 4-15/16" 2- #8 x 3/4" & 4- #8 x 1-1/2" 23 lbs.
135337 5" 0.12" 6-1/16" 2- #8 x 3/4" & 4- #8 x 1-1/2" 35 lbs.
136337 6" 0.11" 7-1/4" 2- #12 x 3/4" & 6- #12 x 1-1/2" 48 lbs.
138337 8" 0.12" 9-11/16" 9- #12 x 1-1/2" 60 lbs.
130337 10" 0.16" 11-15/16" 9- #14 x 1-1/2" 70 lbs.

Note:  Dimensions shown are nominal and subject to variation/change.


Application:  Full surface.

Leaf Material:  Mechanically galvanized steel.

Pin:  Two staked Weatherguard zinc finish steel pins that extend approximately half the length of the knuckle.

Screws:  Includes T18-8 stainless steel Phillips flat head tapping screws.


Made in China.